WebHi Sysadmin, I have a VNX5200 (Block) running software version 05.33.009.5.186 and UniSphere Service Manager informs me that 05.33.009.5.236 is available. Using the VNX … http://vstrong.info/2012/05/28/how-to-configure-emc-vnx-control-station-and-datamovers-to-use-a-ntp-server/
Dell VNXe, VNX, SC Limitations - User Guide for VMware vSphere
WebMay 28, 2012 · Tick ‘Enable NTP’ and select time synchronization interval from the drop down menu. The options are: 30 mins (default), 1 hour, 4 hours, 12 hours, 1 day, 7 days, 30 days. Type IP address (es) of the NTP servers. You can configure up to ten NTP servers maximum. Click Apply. Click OK. Make sure EMC Control Station can ping NTP server IP ... WebIf you install NavisphereCLI on a machine, and from the working SP run the following commands; Create a security file with username/password for the SP. naviseccli -address … fax a pdf file from my computer free
dell VNX5200 - device.report
http://www.asgaur.com/wp/how-to-halt-the-vnx-for-file-nas-server/ WebMay 14, 2012 · The real kicker is that one host works fine, sees all storage (boot LUN and storage LUNs) no problem. I'm set up a boot-from-SAN configuration with 4 UCS - B200 M2 blades and a VNX 5300 connected by x2 MDS 9148 FC switches. I know zoning is correct as they are able to boot. If I monitor connectivity status in the VNX I see them registered and ... fax a pdf from iphone